6
b) Select (EDIT), and change the network type from STATIC to DHCP.
Then, Click APPLY to save your changes.
SETUP
NETWORK TYPE DHCP
IP 10.1.1.14
PORT 88
USER NAME Admin
PASSWORD *****
NETMASK 255.255.255.0
GATEWAY 10.1.1.10
PRIMARY DNS 8.8.8.8
CANCEL
APPLY
c) Check to assign the camera to a specific channel automatically, and choose ADD.
IP SEARCH
ASSIGN EDIT DEVICE TYPE IP NETMASK GATEWAY PRIMARY DNS
PORT MAC VENDOR
CH01
IPCAM 10.1.1.14 255.255.255.0
10.1.1.10 8.8.8.8 88 00:0E:53:31:06:E5
AVTECH
REFRESH ADD
d) The device will then detect the IP camera and display images soon.
Note: To configure this recorder to access other IP camera connected remotely for live viewing or video
backup, you need to connect this recorder to Internet first.
To Next Page
Loading...
Need help?
General
