Why is there no live video on my Avtech DVR?
If you're getting no live video on your Avtech DVR, here are a few things to check: * Make sure the camera is receiving power. * Verify the camera lens setting. * Check the video cable and connection for both the monitor and the camera.
How to fix Avtech DVR with no power?
If your Avtech DVR has no power, check the power cord connection. Also, confirm that the outlet is supplying power.
Why is my Avtech DVR not recording video?
If you're not getting any recorded video on your Avtech DVR, make sure the HDD is properly installed and connected. Also, check that both “MANUAL RECORD ENABLE” and the record function in the “CAMERA” menu are set to “ON”.
What to do if Avtech AVC792 DVR HDD detection failed?
If your Avtech DVR is failing to detect the HDD, try replacing it with another HDD for testing. You can also try replacing the HDD cable for testing purposes.
Why failed to backup recorded files of Avtech AVC792 DVR from remote PC side?
If you're having trouble backing up recorded files from your Avtech DVR to a remote PC, ensure your user level is SUPERVISOR. Check that the network connection information (IP Address / Port / User Name / Password) is correct. Also, specify the hard disk (HDD Number) and channel number (Channel) containing the recorded data you need.
Why Avtech AVC792 DVR can't detect USB flash drive?
If your Avtech DVR can’t detect your USB flash drive, try replacing it with another USB flash drive for testing. Also, format the USB flash drive as FAT 32 and try again.
Why motion detection recording is not working on Avtech DVR?
If motion detection recording isn't working on your Avtech DVR, check that the “EVENT RECORD ENABLE” option is set to “ON”. Also, ensure the detection function “DET” is set to “ON” and that the detection area “AREA” has been set up.
Why is timer recording not working on my Avtech DVR?
If timer recording is not working on your Avtech DVR, check if the “TIMER RECORD ENABLE” option is set to “ON” and the timer schedule has been arranged.
Why can't I play recorded data on my Avtech AVC792 DVR?
Your Avtech DVR requires at least 8192 images of recorded data for playback to work properly. If there's less data, the DVR will stop the playback. For example, if the IPS is set to 30, the recording time should be at least 273 seconds (8192 images / 30 IPS) for the playback to work properly.
Why failed to upgrade firmware on Avtech AVC792 DVR?
If you're failing to upgrade the firmware or OSD file on your Avtech DVR, check that the USB flash drive is formatted to FAT32. Also, verify that the firmware or OSD file you are using is correct.
To Next Page
General
