Avtron 2000 Series - Maintenance Procedures; Daily Maintenance Checks

Avtron 2000 Series Manual Toggle Switch Load Bank • Maintenance Use
r
’s Guide
5-1
SECTION V
MAINTENANCE
To provide long equipment life and to reduce the chance of electric shock, fires, and
personal injury, good maintenance procedures must be used. Before servicing, review the
SAFETY CONSIDERATIONS section of this manual.
The following examples of scheduled maintenance procedures are not purported to be
all-inclusive, but must be accomplished to maintain the equipment in a good, safe condi-
tion. All maintenance work must be done only by qualified personnel.
W A R N I N G
Personal injury from electrical shock or from the moving fan
blade may result if ALL sources of power are not
disconnected. Refer to the SAFETY CONSIDERATIONS
section of this manual.
DAILY
1. Remove any restrictions to airflow through the load bank.
2. Check the screens to make sure that no objects have blocked or entered the
openings.
3. Verify that the airflow is in the proper direction.
4. Assure that there is no recirculation of the exhaust air through the load bank.