Description
Avtron Outdoor Load Bank • Part Number K875A 1035409
2-3
The Load Bank is equipped with screens mounted at the inlet openings and exhaust hoods. The
Load Bank uses a welded base to facilitate handling by a forklift truck. Bolt holes are also supplied
in the base to permit permanent mounting to a concrete pad or metal foundation.
*************************************************************
C A U T I O N
Never exceed the rated voltage as this will cause the Load Bank to
overheat.
Do not apply DC voltages as the contactors do not have arc blowout
magnets.
*************************************************************
DIGITAL METER (OPTIONAL)
Refer to the supplemental meter manual for digital meter description and operation.
To Next Page
Loading...