Need help?Do you have a question about the awave DSP-12AD and is the answer not in the manual?
General| Power Output | 1200W Max |
|---|---|
| Signal to Noise Ratio | >90dB |
| Low Pass Filter | 50Hz - 250Hz |
| Input Sensitivity | 0.2V - 6V |
| Operating Voltage | 12V |
Step-by-step guide for physically installing the DSP and DRC unit in a vehicle.
Explains the different types of input signals and their connection points.
Details the available output signal connections for speakers and other audio devices.
Description of connections for remote control inputs/outputs and power supply.
Instructions for correctly connecting the power supply and remote turn-on wires.
Guide for connecting the DSP to a personal computer and the DRC unit.
How to connect speaker outputs from the car stereo to the high-level inputs.
Details on the high-level output signal connections.
Instructions for connecting main level audio inputs, including Bluetooth.
Connecting low-level audio sources and Bluetooth module.
Steps for launching and performing initial operations within the DSP software.
Overview of the DSP software's main interface elements and layout.
Guide to common operations within the GUI, including language, saving, and loading presets.
Details on configuring input modes, channels, crossovers, and frequency settings via the GUI.
Controls for main volume, mute function, and entering menu mode via the DRC.
Explanation of the main volume, DSP mode, and input status display windows.
To Next Page
