Do you have a question about the Awenta SILENCE Series and is the answer not in the manual?
Read manual carefully before use. Manufacturer not liable for damages from incorrect operation or unauthorized modifications.
Details on safe usage by children and persons with limited abilities, emphasizing supervision and understanding of risks.
Intended for indoor air, temperate climate. Max temp +40°C. IPX4 rated. Specific installation requirements apply.
Standard version for connecting the air exhaust fan to the power supply via an on/off switch.
Allows setting a delay time (3-30 mins) for fan operation after lights are off or switch is turned off.
Operates between 40-90% RH. Can automatically start/stop fan based on humidity levels and stop delay timer.
Enables switching the air exhaust fan on and off by pulling the cord.
Starts the fan when motion is detected. Offers adjustable delay stop times from 3 to 30 minutes.
Choose location, prepare power cable, drill holes, and fasten fan housing. Ensure safe cable entry and sealing.
Start fan after all safety precautions are in place. Check for steady operation and efficient air handling.
Must be done by qualified electricians. Follow standards and use appropriate circuit breakers. Match voltage/frequency.
Service by qualified professionals only. Isolate power before maintenance. Check rotor for cracks. Motor is maintenance-free.
Clean with a damp cloth. Do not use aggressive solvents or high pressure water. Ensure fan dries properly.
5-year warranty. Covers manufacturer defects. Excludes improper installation, use, transport, or unauthorized repairs.
| Series | SILENCE |
|---|---|
| Material | Plastic |
| Impeller type | Axial |
| Noise level | 26 dB(A) |
| Frequency | 50 Hz |
| Color | White |
| Mounting | Ceiling |
Loading...