Awoco TZ-6001 - User Manual

Plunger Micro Switch Installation Manual
Visit www.awoco.com for more information
Note: consult with your electrical professional for electrical connection. 120VAC
connection might require hard wired.
Awoco Air Curtains: Cut the connection nut off
the dedicated 2 wires for door switch, extend and
connect the wires to the micro switch’s NC and
COM poles.
Awoco
Air Curtain
Ground
Neutral
Hot
Plunger Micro switch
120V AC
Power Input
NC N O COM
Other brands’ air curtains: Cut the power cord’s
Hot wire (usually black color) and connects to the
micro switch NC and COM poles.
Other Brands
Air Curtain
Ground
Neutral
Hot
Hot
Plunger Micro switch
120V AC
Power Input
NC N O COM
The air curtain should be installed indoor, follow the below diagrams for the recommended
installation.
Door Type Installation Diagram
Applicable
Micro Switch
Models
Installation
Difficulty
Rating
Outward swing doors
If the door swings outward, mount the micro
switch on the side of the door frame or the
upper side of door frame.
TZ-6001
TZ-6003
Easy
Inward swing doors
If the door swings inward, please use metal
sheet to create the brackets (not included) to
install the micro switch.
TZ-6001
TZ-6003
Medium
In & out swing doors
If the door swings in and out, please place
the roller plunger micro switch on the upper
side of the door frame with a metal bracket
(not included) mounted on the top of the door.
TZ-6003 Hard
Middle ended sliding doors
If double sliding doors ended in the middle,
please place the plunger micro switch on the
upper side of the door frame with a metal
bracket (not included) mounted on the top of
the door.
TZ-6001
TZ-6002
TZ-6003
Easy

Summary

Wiring and Connection

Awoco Air Curtains Wiring

Cut connection nut off dedicated 2 wires for door switch, extend to micro switch NC and COM poles.

Other Brands Air Curtains Wiring

Cut power cord's hot wire (black) and connect to micro switch NC and COM poles.

Installation by Door Type

Outward Swing Doors Installation

Mount micro switch on the side of the door frame or the upper side of door frame.

Inward Swing Doors Installation

Use metal sheet to create brackets to install the micro switch.

In & Out Swing Doors Installation

Place roller plunger micro switch on upper side of door frame with metal bracket.

Middle Ended Sliding Doors Installation

Place plunger micro switch on upper side of door frame with metal bracket.

Side Ended Sliding Doors Installation

Place plunger micro switch on side of door frame with metal bracket.

Sliding Doors Installation

Mount micro switch on the top of the door with a metal bracket.

Roll Up Gate Installation

Place roller plunger micro switch on side of door frame with metal bracket.

Magnetic Circuit Conversion Kit

Overview and Usage

Converts 120VAC to 12VDC for use with magnetic switches in all situations.

Compatibility Warning

Do not replace 120VAC micro switch directly with 12VDC magnetic switch; use conversion kit.

Support and Contact

Contact Information

Provides website, email, and phone number for technical support and sales.

Awoco TZ-6001 Specifications

General

Brand	Awoco
Model	TZ-6001
Category	Switch
Language	English