Why is there no sound on my AWOL VISION LTV-2500 Projector, but the picture is fine?
First, check the volume settings on your AWOL VISION Projector. Then, confirm that 'Mute' mode is not enabled. Finally, verify the sound output setting (Speaker, Bluetooth, HDMI (eARC) or S/PDIF).
What to do if the sound and/or picture on my AWOL VISION LTV-2500 is distorted or wavy?
A nearby electric appliance might be interfering with the projector. Try turning off any appliances close to the TriChroma laser and move them farther away. If that doesn't work, try plugging the TriChroma laser into a different power outlet.
General| Display Technology | DLP |
|---|---|
| Brightness | 2500 ANSI Lumens |
| Throw Ratio | 0.25:1 |
| Light Source Life | 25, 000 hours |
| 3D Support | No |
| Connectivity | Wi-Fi, Bluetooth |
| Resolution | 3840 x 2160 (4K UHD) |
| Inputs | HDMI, USB |
| Operating System | Android |
| Built-in Speakers | Yes |
| HDR | HDR10 |
To Next Page
