Why is there no sound on my AWOL VISION LTV-3500 Projector, but the picture is fine?
First, check the volume settings on your AWOL VISION Projector. Then, confirm that 'Mute' mode is not enabled. Finally, verify the sound output setting (Speaker, Bluetooth, HDMI (eARC) or S/PDIF).
What to do if the sound and/or picture on my AWOL VISION LTV-3500 is distorted or wavy?
A nearby electric appliance might be interfering with the projector. Try turning off any appliances close to the TriChroma laser and move them farther away. If that doesn't work, try plugging the TriChroma laser into a different power outlet.
Why does my AWOL VISION Projector show a high-temperature message and shut off?
Ensure the device is operating within its proper ambient temperature range and that the vents are not blocked. You may also want to restart the device.
What to do if the light output of the TriChroma laser is disabled on my AWOL VISION Projector?
Uncover or carefully clean the foreign object detection window.
General| Brightness | 3500 ANSI Lumens |
|---|---|
| Resolution | 3840 x 2160 (4K UHD) |
| Display Technology | DLP |
| Light Source | Laser |
| Operating System | Android TV |
| HDR Support | HDR10 |
| Lamp Life | 25, 000 hours |
| Screen Size | 80 - 150 inches |
| Connectivity | HDMI, USB, Ethernet, Wi-Fi, Bluetooth |
| Dimensions | 600 x 380 x 140 mm |
| Weight | 11 kg |
To Next Page
