Awox SMLm-c13g-E27 - Adding and Managing Bulbs and Remotes

Ref: 1.8 User Guide LED Bulbs Bluetooth Mesh
AwoX Confidential Document – Do not copy Page: 25 of 60
4 Adding a bulb
4.1 ADDING A BULB T A GROUP WITHOUT REMOTE CONTROL
Simply combine the bulb with the app. Refer to Chapter Erreur ! Source du renvoi introuvable..
4.2 ADDING A BULB IN A GROUP ALREADY CONTROL FROM A REMOTE
4.2.1 IF THE REMOTE WAS NEVER ASSOCIATED TO THE APP
Refer to chapter Erreur ! Source du renvoi introuvable.
4.2.2 IF THE REMOTE IS ALREADY ASSOCIATED IN THE APP
First associate your bulb with the application, as described in chapter Erreur ! Source du renvoi introuvable..
Then, via the application, you will associate the new bulb with the remote control.
1. At this point, the new bulb can only be
controlled from the app.