Descri
tion of Functions
12
HIGH LIMIT
Use the high limit setting as a means of visually flagging the operator when a
reading falls over a desired maximum value.
High limits are set in the identical way as low limits. Please refer to the Low
Limit section for details.
NOTE ON LIMITS: The green LED on the front of the display will flash when a
peak is captured that falls within the limit setting.
SLEEP MODE
To conserve battery life, the display is equipped with a "sleep" mode, which
sets the unit to standby after a user-settable amount of time has passed
without activity. Press the + key to increase the number of minutes the unit
will wait for input, or press the - key to decrease the number. This example
shows a value of four minutes.
The highest possible sleep setting is 20 minutes. Press ENT to accept the
value and continue to the next function.
AWS-3000 Guide
To Next Page
Loading...