AWS mini PRO-50 - Advanced Calibration (Linear)

• Advanced Calibration (Linear):
You will need two weights to perform Advanced Calibration:
**MiniPRO-50 takes a 20g and a 50g weight.
**MiniPRO-100 takes a 50g and a 100g weight.
Press the “Menu” button one time, “SCALE” will be displayed
on the LCD; Press the “Units” button once to change to “LINE”
mode, then press “Tare” to conrm. The scale will display
the rst required weight. Press “Tare” again to conrm. The
value will ash on the display. Place the rst required weight
onto the weighing platform. In a few seconds, the display will
show the second required calibration weight. Add the second
weight to the platform. After a few more seconds, the weight
will be accepted and the scale will return to normal weighing.
Calibration is complete!
Model MiniPRO-50 MiniPRO-100
Capacity 50g / 1.7637oz / 1.6075ozt /
32.15dwt / 771.62gn / 250ct
100g / 3.5273oz / 3.2150ozt /
64.3dwt / 1543.25gn / 500ct
Resolution 0.001g / 0.0001oz / 0.0001ozt
/ 0.001dwt / 0.02gn / 0.005ct
0.002g / 0.0001oz / 0.0001ozt
/ 0.002dwt / 0.05gn / 0.01ct
Display
5 - Digit Backlit LCD
Calibration Weight
(not Included)
20g, 50g 50g, 100g
Platform Dimensions
(inches)
2.7” Diameter
Scale Dimensions
(inches)
5.2 x 3.7 x 2.3 ”
Power 4 x AAA Alkaline Batteries or
6V 100mA Adapter (included)
In a few seconds, the display will stop ashing, and return to
normal weighing. Calibration is complete!