Need help?Do you have a question about the AXIOMTEK SBC82610 SERIES and is the answer not in the manual?
General| Form Factor | 3.5" SBC |
|---|---|
| Expansion Slots | 1x Mini PCIe |
| USB | 2x USB 2.0 |
| Display Output | 1 x HDMI, 1 x LVDS |
| Serial Ports | 2x RS-232/422/485, 2x RS-232 |
| Digital I/O | 8x DIO |
| Operating Temperature | -20°C ~ +70°C |
| Power Input | 12V DC |
| Dimensions | 146mm x 102mm |
Lists specifications including processor, chipset, I/O, memory, cache, and watchdog timer.
Summary of jumpers and their default settings for onboard devices.
Explains JP7 settings for watchdog timer trigger mode (NMI or RESET).
Explains JP1, JP2, JP3 settings for COM2 port configuration (RS-232, RS-422, RS-485).
Details the 40-pin IDE interface connector (IDE1) for handling 2 IDE drives.
Details pin assignments for VGA1 (CRT), LCD1, LCD2 (Flat Panel) connectors.
Details serial port interface, COM1/COM2, RS-232/422/485 connectivity.
Describes the multi-mode parallel port (LPT1) interface and its modes.
Lists I/O port addresses and their assigned devices on the CPU card.
Details the S3 Graphics ProSavage4 VGA accelerator and its features.
Instructions on how to enter and navigate the BIOS Setup utility.
Guides setting system clock, date, IDE configuration, and memory.
Details settings for Virus Warning, Cache, Boot Device, and NumLock.
Covers DRAM timing, AGP aperture, OnChip USB, and PCI settings.
Sets up IDE channels, FDD, Serial Ports, and Parallel Port modes.
Configures ACPI, Power Management modes, and Video Off options.
To Next Page
