Axis Car Audio AX1502BT

Questions and Answers

J
jarvisanthonyAug 12, 2025
Why won't my Axis Car Audio AX1502BT switch on?
- M
  Mary RamirezAug 13, 2025
  Your Axis Car Audio Car Receiver might not be switching on because the car ignition isn't on, a cable is not properly connected, or a fuse has blown. Try turning the car key in the ignition, checking the cable connection, or replacing the fuse with a new one of the same rating.
T
Terry RoseAug 16, 2025
What to do if there is no sound from Axis Car Audio Car Receiver?
- J
  Jeremy AriasAug 16, 2025
  If you're not getting any sound from your Axis Car Audio Car Receiver, the volume might be set to the minimum or the mute function could be activated. Check the volume level and switch the mute function off.
A
Amanda GordonAug 20, 2025
Why are preset stations lost on my Axis Car Audio AX1502BT Car Receiver?
- P
  Patricia SmithAug 20, 2025
  If you are losing preset stations on your Axis Car Audio Car Receiver, it might be because the battery cable is not properly connected. Ensure that you connect the permanent live circuit on the unit to the permanent live circuit of the vehicle.
O
oclarkAug 23, 2025
What to do if my Axis Car Audio AX1502BT Car Receiver is not playing discs?
- J
  James GreenAug 23, 2025
  If your Axis Car Audio Car Receiver isn't playing discs, it could be due to incorrect disc insertion or a dirty/damaged disc. Make sure the disc is inserted with the label side facing up. If that doesn't work, clean the disc and check for any damage, or try another disc.
C
charles70Aug 27, 2025
Why is the reception of radio station poor on my Axis Car Audio AX1502BT?
- K
  Karen HallAug 27, 2025
  Poor radio station reception on your Axis Car Audio Car Receiver could be because the antenna is not fully extended or is broken. Fully extend the antenna, and if it's broken, replace it with a new one.
E
Emily LeeAug 31, 2025
How to fix sound skips due to vibration on Axis Car Audio AX1502BT?
- J
  James RobertsonAug 31, 2025
  Sound skipping in your Axis Car Audio Car Receiver due to vibration may be caused by a mounting angle over 45° or an unstable mounting. Adjust the mounting angle to less than 45° and securely mount the unit with the supplied parts.
A
Allison SullivanSep 3, 2025
Why I am unable to receive stations on my Axis Car Audio AX1502BT?
- L
  Laura AtkinsSep 3, 2025
  If you're unable to receive stations on your Axis Car Audio Car Receiver, the antenna might not be connected properly. Ensure the antenna is correctly connected.
P
Peter HallSep 8, 2025
What to do if I am unable to insert USB device or SD/MMC card into Axis Car Audio AX1502BT?
- J
  Jason Stephens PhDSep 8, 2025
  If you can't insert a USB device or SD/MMC card into your Axis Car Audio Car Receiver, it might be inserted the wrong way round. Try inserting it the other way around.