8-5 Periodic Maintenance and Adjustment
ITEM
MAINTENANCE INTERVAL
(WHICHEVER COMES FIRST)
REMARKS
Hours Frequency Miles (KM)
Routine Maintenance Check (performed at each interval below, whichever comes first)
Air filter 5 H - - Inspect; replace as needed
Brake pad wear 20 H Monthly 250 (402) Inspect periodically
Throttle Body Intake 20 H 1 M 250 (402) Inspect duct for proper sealing/air leaks
Battery 20H Monthly 250 (402) Check terminals; clean; test
Fuel System 25 H Monthly 250 (402) Check lines & fittings for leaks
General lubrication 25H 3 M 250 (402) Lubricate all fittings, pivots, cables, etc.
Shift Linkage 25H 3 M 250 (402) Inspect, lubricate, adjust
Engine Oil & Filter 50 H 6 M 500 (800) Replace
Steering 50 H 6 M 500 (800) Lubricate
Front / Rear Gearcase
Fluid
50H 6 M 500 (800) Change Fluid
Front / Rear Stabilizer
Bars
50H 6 M 500 (800) Lubricate and inspect bushings
Throttle Pedal/Cable 50 H 6 M 500 (800) Inspect for free movement & lubricate
Drive Belt 50 H 6 M 500 (800) Inspect; replace as needed
To Next Page
Loading...