Axis 200+ - Page 111

Appendix G: CRON Script Command Reference AXIS 200+ Users Manual
110
-dest Specifies the name and whole path of the destination file. If
omitted, the destination file name will be the same as the
source file name. The maximum length of a destination file
name is 255 characters. You can add as many destination files
as required, separated by a space.
You can add time stamps, such as time, date and file indexes, to
the destination file name. This is useful for example when you
are transferring a series of files.
The following table lists the available time stamp variables.
Every substitution must be proceeded by a dollar sign 
$.
$s
The current second in the range 00-59.
$m
The current minute in the range 00-59.
$h
The current hour in the range 00-23.
$d
The current day of the month in the range 01-31.
$n
The current month in the range 01-12.
$y
The current year without the century in the range 00-99.
$Y
The current year including the century.
$rS-E
Inserts an index number starting from number S through all
the numbers including the number
E. If you leave out number
E, it will be interpreted as a very large number. Note: The rS-E
substitution can be used with the first destination file only.
-temp Specifies a temporary name for the destination. This is to
prevent someone else from accidentally reading the file during
the download.