Axis 200+ - Page 112

AXIS 200+ Users Manual Appendix G: CRON Script Command Reference
111
-loop Specifies the time interval within which the command
should be repeated. Used together with the time attribute. If
omitted, there will be no delay between repeated transfers.
Format:
h<hours>m<minutes>s<seconds>. Optional.
-time Specifies the total time the command should loop. Used
together with the loop attribute. If omitted, the ftp command
will be issued only once. Format:
h<hours>m<minutes>s<seconds>. Optional.
-buffer
Specifies the buffer type, i.e. fullsize.jpg, halfsize.jpg
or
hugesize.jpg. Only valid if -src is set to
images/buffer.jpg.
-ctrlport
Specifies connection to a nonstandard control port.
-dataport
Specifies the use of a nonstandard data port.
-to Specifies changes of the timeout time during the connection
establishment phase. Could be useful when connecting
modems. Format:
h<hours>m<minutes>s<seconds>
Note:
❏ The ftp command keeps the connection open during each file
transfer.