Axis 200+ - Stage 4: Assigning an Internet Address

Section 2: Installing the AXIS 200+ AXIS 200+ Users Manual
16
3. Connect your AXIS 200+ to the network using an Ethernet 10baseT
connector.
4. Connect the power supply to the AXIS 200+.
5. Check that the Power indicator is constantly lit.
Stage 4. Assigning an Internet Address
To access the AXIS 200+ from a Web browser, you must first assign a
valid Internet address.
Refer to Section 3 - Assigning an IP Address on how to do this.
Stage 5. Verifying the Installation
After assigning an Internet address, verify the connection between
your AXIS 200+ and the network. Follow these steps: