Axis 200+ - Relay Output; Digital Inputs

AXIS 200+ Users Manual Appendix D: The Auxiliary IO Port
85
Once access is granted, the following files are displayed:
Relay Output
You can use the relay output to drive directly a maximum load of 24V
AC/DC at 100mA. By connecting additional relay circuitry, you can
also use this output to drive heavier loads.
You can drive the relay off and on simply by clicking
relayoff.txt
or relayon.txt in the above URL. Clicking on either of these will
return either of the following messages, respectively:
Digital Inputs
The two digital inputs on pins 6 and 7 of the connector make it
possible to trigger your snapshots on chosen events. However, you
must use a CRON script to implement this functionality. See CRON
Script on page 51.
relayon.txt
relayoff.txt
input.txt
Relay is Off
Relay is On