Axis AX1805BT - Basic Operation Modes; Radio and USB Operation

Select a station with or
Basic Operation
Turn on/off the unit and MUTE function
Press the
/MUT button to turn on the unit. When the unit is on. Shortly press this button for mute
on/off. Press and hold it for 2 seconds to turn off the unit.
Audio setting menu adjustment
Repeatedly press VOL knob for the audio menu:
BAS(Bass), TRE(Treble), BAL(Balance), FAD(Fader), EQ-LOUD
Press and hold the VOL knob for the settings menu: P_VOL-CT(INDEP/SYNC), ST/MONO-DX/LOC
In each setting, rotate the VOL knob to set them.
Switch source
Shortly press the MODE button to change source. Also shortly press the MENU button and
rotate the VOL knob to select other sources or settings, then press the VOL knob.
Main menu adjustment
Shortly press the MENU button and rotate the VOL knob to select SETTINGS then press the
VOL knob. Below settings available:
Language, Radio, Area, Time, Time mode, Date, PAL/NTSC, Led Color, Video Warning, Factory
default, Version
In each item rotate the VOL knob to set them.
Reset the unit
Press the RESET button to reset the unit. This should be activated for the following reasons:
a) Some buttons do not operate.
b) Error symbol shows on the display.
Note: if the RESET function is activated, all memory will be lost.
There is a “Factory default” setting in the settings menu. This will also reset the settings.
Radio Operation
Receive a radio station
In RADIO source, press the BAND button to select the desired band. Shortly press
/
button to
button
for manual tuning the frequency.
/tune the desired radio station. Press and hold
Auto Store:
Press BAND button for 2 seconds to auto store stations to bands 1~3.
Manually store stations & recall preset stations
button. Press and hold one of the 1- 6 preset button for 2 seconds.
The current station will be stored into the preset button. Shortly press the preset button
(1~6) to change to the station that is saved in the corresponding preset button.
USB Operation
When a USB drive is inserted in to the unit, the unit will play the MP3/WMA files automatically. If
a USB drive is already inserted in the unit, press the MODE button repeatedly until the USB mode
display appears.
OPERATION
6