Need help?Do you have a question about the Axis M2026-LE Mk II and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ modes | Digital PTZ |
| Certification | EN 55032 Class A, EN 55024, IEC 62471, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class A, RCM AS/NZS CISPR 32 Class A, KCC KN32 Class A, KN35 IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-78, IEC 60068-2-14, IEC 60068-2-6, IEC 60068-2-27, IEC/EN 62262 IK08, IEC/EN 60529 IP66, NEMA 250 Type 4X |
| Languages support | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, POR, RUS |
| Number of languages | 11 |
| Placement supported | Outdoor |
| Connectivity technology | Wired |
| Infrared (IR) cut-off filter | Yes |
| Total megapixels | 4 MP |
| Maximum resolution | 2688 x 1520 pixels |
| Supported video modes | 1440p |
| Image quality adjustment | Brightness, Contrast, Sharpness |
| Video compression formats | H.264, H.265, M-JPEG, MPEG4 |
| Supported graphics resolutions | 320 x 240, 2688 x 1520 |
| Built-in HDD | No |
| Flash memory | 256 MB |
| Internal memory | 512 MB |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
| Form factor | Bullet |
| Mounting type | Ceiling/wall |
| Product color | White |
| Housing material | Polymer |
| International Protection (IP) code | IP66 |
| LED type | IR |
| Infra-red wavelength | 850 nm |
| Night vision distance | 15 m |
| Camera shutter speed | 1/31500 - 1/5 s |
| Minimum illumination | 0 lx |
| Sensor type | CMOS |
| Optical sensor size | 1/3 \ |
| Lens mount interface | M12 |
| Focus adjustment | 2.2 |
| Fixed focal length | 2.4 mm |
| Number of cameras | 1 |
| Bluetooth | - |
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.3, IEEE 802.3af, IEEE 802.3u |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, Bonjour, UPnP TM , SNMP v1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH |
| Security algorithms | 802.1x RADIUS, HTTPS, SSH, SSL/TLS |
| Alert notification type | |
| Password protection type | User |
| Power source type | PoE |
| Power consumption (max) | 7.9 W |
| Power consumption (typical) | 5.1 W |
| Storage temperature (T-T) | -40 - 65 °C |
| Operating temperature (T-T) | -30 - 50 °C |
| Harmonized System (HS) code | 85258900 |
Weight and Dimensions| Height | 174 mm |
|---|---|
| Weight | 500 g |
| Diameter | 101 mm |
Methods to find Axis products and assign IP addresses, including recommended browsers and access via IP address.
Guidance on setting strong passwords, avoiding defaults, and changing them regularly for enhanced security.
Overview of video compression options like Motion JPEG, H.264, and H.265, and their impact on bandwidth.
Tips for reducing noise in low-light conditions by adjusting shutter speed and image sharpness.
Steps to set up action rules by defining triggers and corresponding actions for the camera.
Procedure for resetting the product to factory default settings, emphasizing caution due to configuration loss.
Guide on downloading and installing the latest firmware, with notes on potential settings preservation.
Common reasons for firmware upgrade failure, typically related to uploading an incorrect firmware file.
To Next Page