Need help?Do you have a question about the Axis Q6000-E Mk II and is the answer not in the manual?
General| Resolution | 1920x1080 |
|---|---|
| Compression | H.264, H.265, Motion JPEG |
| Environment | Outdoor |
| Sensor Resolution | 2 MP |
| Maximum Resolution | 1920x1080 |
| Day/Night | Yes |
| IR Illuminators | No |
| Vandal Proof | Yes |
| Ingress Protection | IP66 |
| Network Interface | 10/100 Ethernet |
| Power over Ethernet | Yes |
| Pan/Tilt/Zoom | Yes |
Locate the Axis device on the network and assign IP addresses using utilities.
Instructions on how to access the Axis device through its IP address or hostname.
Guide to setting the initial administrator root password for secure access.
Steps to connect the AXIS Q6000-E to a PTZ Network Camera, including credentials.
Procedure for calibrating PTZ camera channels to ensure proper functionality.
A guide to essential initial settings before using the Axis product.
Steps to configure video streams, including image, H.264, and MJPEG settings.
Configuring detection of camera repositioning, lens covering, or defocusing.
Setting up motion detection windows and parameters to trigger alarms.
Defining conditions and actions for the device to perform based on events.
Accessing and filtering stored recordings from the SD card or network share.
Managing user access, passwords, and anonymous login settings.
Connecting and calibrating the PTZ Network Camera for integrated control.
Configuring IP settings, including TCP/IP, DHCP, and static IP addresses.
Procedure for resetting the product to its original factory default settings.
Common problems, their causes, and suggested solutions for troubleshooting.
To Next Page