Axis Q6000-E Mk II - Configuring Replacement Lenses; Installation Steps

AXISQ6000-EMkIIPTZNetworkCamera
Configuringreplacementlenses
Configuringreplacementlenses
Afterreplacingoneormorelensesonthecamera,thenewlensesmustbecongured.Ifpossible,werecommendthatyouperform
andtestthewholeinstallationone.g.aworkbenchbeforeyoumountthecamerainitsintendedposition.
Pre-requisites
Theinstallationrequiresthefollowing:
•1ormorereplacementlensescompatiblewiththecamera
•Camerarmwareversion6.50.2.3orlater.Ifyouneedtoupgradethecamera,pleasedosobeforestartingthelens
replacement.YoucanreadaboutupdatingthermwareinHowtoupgradethermwareonpage75.
Installationsteps
1.Disconnectpowertothecamera.
2.Replacethelens(es),followingtheinstructionsintheinstallationguide,availableat
https://www.axis.com/products/axis-q6000-e/support-and-documentation
3.Connectpowertothecameraandbrowsetothewebinterface.
4.GototheApplicationssectionofthesetuptools:
5.Inthelistofapplications,checkthat“LensSelection”isrunning.Ifthestatusis“Stopped”,click“Start”.
6.ClickLensSelectiontoopentheapplication,andthenLensselectionsettings.
39