Axis P14 Series Repainting Instructions

AXIS P14 Series
How to repaint the product
5
Risks
There are several risks when disassembling an AXIS P144X network camera. There is always a certain
yield loss during assembly. Training of operators and the use of correct tools will mediate some of the
problems but they can never be fully avoided. Some of the risks are listed below:
• ESD Damage. When disassembling the camera there is a risk of ESD damage. Always handle
the product in an ESD safe environment. Even if precautions are taken there is always a risk of
ESD damage. The damage can remain undetected and cause problems during the lifetime of the
camera.
• Dust contamination. Opening the camera exposes the lens to dust or paint; dust will affect the
optical performance. The lens needs to be disassembled in a dust-free environment, preferably a
cleanroom.
• Paint overspray. Masking of the different components of the camera is critical. Failure to mask
sensitive areas could cause electrical, optical, temperature or grounding failures.
• Material damage. The paint composition could affect the substrate material especially polymers.
The coating can possibly cause stresses and cracks in the material.
3. Disassembly instructions for AXIS P1445/47/48-LE camera
To repaint an AXIS P144X Network Camera, the camera must first be disassembled. Each part is then
stripped from components and crucial parts are masked to ensure successful reassembly.
Separate product outer parts:
1) Remove the bottom base cover and the weather shield from camera unit.

Axis P14 Series Specifications

General

Brand	Axis
Model	P14 Series
Category	Security Camera
Language	English