Need help?Do you have a question about the Axis P1447-LE and is the answer not in the manual?
General| Sensor type | CMOS |
|---|---|
| Progressive scan | Yes |
| Optical sensor size | 1/2.9 \ |
| Optical zoom | 3 x |
| Focal length range | 2.8 - 8.5 mm |
| Maximum aperture number | 1.2 |
| Camera shutter speed | 2 - 62500 s |
| Minimum illumination | 0.03 lx |
| Lens type | Varifocal |
| Type | IP security camera |
| PTZ modes | Digital PTZ |
| Certification | EN 55032 Class A, EN 50121-4, IEC 62236-4, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class A, RCM AS/NZS CISPR 32 Class A, KCC KN32 Class A, KN35, IEC/EN/UL 62368-1, IEC/EN/UL 60950-22, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2-27, IEC 60068-2-78, IEC/EN 60529 IP66/IP67, IEC/EN 62262 IK10, NEMA 250 Type 4X, IEC 62471 |
| Languages support | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, KOR, POR, RUS |
| Number of languages | 11 |
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wired |
| Total megapixels | 5 MP |
| Maximum resolution | 3072 x 1728 pixels |
| Image quality adjustment | Brightness, Contrast, Saturation, Sharpness |
| Video compression formats | H.264, M-JPEG, MPEG4 |
| Wi-Fi | No |
| Streaming method | Multicast |
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.1x, IEEE 802.3af, IEEE 802.3at |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMP v1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, SRTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH, LLDP |
| Sample rate | 48 kHz |
| Audio formats supported | ADPCM, G.711, G.726, LC-AAC, LPCM |
| Ethernet LAN (RJ-45) ports | 1 |
| Alert notification type | |
| Behavior analysis | Line crossing detection |
| Built-in HDD | - |
| Flash memory | 512 MB |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC, SD |
| IK code | IK10 |
| Form factor | Bullet |
| Mounting type | Wall |
| Product color | Black, White |
| Housing material | Aluminum |
| International Protection (IP) code | IP67 |
| Power source type | PoE |
| Power consumption (max) | 12.95 W |
| Power consumption (typical) | 6.7 W |
| LED type | IR |
| Night vision distance | 30 m |
| Storage temperature (T-T) | -40 - 65 °C |
| Operating temperature (T-T) | -40 - 60 °C |
| Harmonized System (HS) code | 85258900 |
Weight and Dimensions| Depth | 260 mm |
|---|---|
| Weight | 1000 g |
| Diameter | 132 mm |
Explains recommendations for protecting device data and services by using strong passwords and changing them regularly.
Guides on setting a secure password for the root account, emphasizing its importance for device security.
Provides information on accessing detailed product features and settings through the built-in help on the webpage.
Details on adjusting camera settings like aperture, shutter speed, and gain for optimal image quality.
Explains cropped sections of the view, their use for bandwidth reduction, and PTZ capabilities.
Defines privacy masks and how to use them to block parts of the monitored area in video streams.
Step-by-step guide to adjust focus and zoom settings on the camera remotely.
Methods to improve license plate recognition by adjusting pixel resolution and other settings.
Adjusting settings like exposure mode, shutter speed, and gain to minimize noise in low-light environments.
Guidance on enabling WDR to improve visibility in scenes with both dark and bright areas.
Configuring the camera to automatically switch to night mode using IR light for better low-light imaging.
Tips for maximizing image detail, including compression settings and streaming options.
Step-by-step guide to display text notifications triggered by motion detection events.
Discusses Motion JPEG and H.264 formats, their bandwidth, and image quality trade-offs.
Strategies to minimize bandwidth usage and storage requirements, including Zipstream and compression.
Instructions for configuring network storage for saving recordings directly from the camera.
Steps to enable audio recording by configuring stream profiles and selecting audio input.
Details on setting up action rules to define when and how the camera performs specific actions based on events.
Configures the camera to start recording before and after motion detection events.
Connects a PIR detector and sets up the camera to record motion detected by the external sensor.
Introduces AXIS Camera Application Platform (ACAP) for third-party analytics and applications.
Guides on restoring the product to its original factory settings, including all configurations.
Steps to verify the currently installed firmware version on the product.
Instructions for downloading and installing the latest firmware to update product functionality.
Covers scenarios like IP conflicts, subnet issues, and obtaining correct IP addresses for network access.
Solutions for login failures, lost passwords, and IP address changes affecting browser access.
Discusses issues related to multicast, rendering, color saturation, and low frame rates in video streams.
Factors affecting bandwidth, frame rate, and CPU load, such as resolution, clients, and applications.
Explains the meaning of different states of the status LED indicator on the product.
Information about the SD card slot, including support for card types and precautions.
Details the functions of the control button for resetting and system service connection.
Describes the RJ45 network connector and the 3.5mm audio connectors and their uses.
Explains the 4-pin terminal block I/O connector for digital inputs and outputs.
To Next Page
