Need help?Do you have a question about the Axis P1445-LE and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ modes | Digital PTZ |
| PTZ control | Yes |
| Certification | EN 55032 Class A, EN 50121-4, IEC 62236-4, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class A, RCM AS/NZS CISPR 32 Class A, KCC KN32 Class A, KN35, IEC/EN/UL 62368-1, IEC/EN/UL 60950-22, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2-27, IEC 60068-2-78, IEC/EN 60529 IP66/IP67, IEC/EN 62262 IK10, NEMA 250 Type 4X, NEMA TS-2-2003 v02.06, IEC 62471 |
| Languages support | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, KOR, POR, RUS |
| Number of languages | 11 |
| Placement supported | Outdoor |
| Connectivity technology | Wired |
| Wi-Fi | - |
| Streaming method | Multicast |
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.1x, IEEE 802.3af, IEEE 802.3at |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMP v1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, SRTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH, LLDP |
| Ethernet LAN (RJ-45) ports | 1 |
| IK code | IK10 |
| Form factor | Bullet |
| Mounting type | Wall |
| Product color | Black, White |
| Housing material | Aluminum |
| International Protection (IP) code | IP67 |
| Sample rate | 48 kHz |
| Audio formats supported | ADPCM, G.711, G.726, LC-AAC, LPCM, PCM |
| Total megapixels | - MP |
| Maximum resolution | 1920 x 1080 pixels |
| Supported video modes | 1080p |
| Image quality adjustment | Brightness, Contrast, Saturation, Sharpness |
| Video compression formats | H.264, M-JPEG, MPEG4 |
| Supported graphics resolutions | 160 x 90, 1920 x 1080 (HD 1080) |
| Power source type | PoE |
| Power consumption (max) | 12.95 W |
| Power consumption (Power over Ethernet (PoE)) | 5.6 W |
| Camera shutter speed | 2 - 1/66500 s |
| Minimum illumination | 0.01 lx |
| Sensor type | CMOS |
| Optical sensor size | 1/2.8 \ |
| Storage temperature (T-T) | -40 - 65 °C |
| Operating temperature (T-T) | -40 - 60 °C |
| Operating relative humidity (H-H) | 10 - 100 % |
| Optical zoom | 3 x |
| Focal length range | 2.8 - 8.5 mm |
| Maximum aperture number | 1.2 |
| Alert notification type | |
| Flash memory | 512 MB |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
| LED type | IR |
| Infra-red wavelength | 850 nm |
| Night vision distance | 40 m |
Weight and Dimensions| Length | 260 mm |
|---|---|
| Weight | 1000 g |
| Diameter | 132 mm |
Details the AXIS P1445-LE-3 License Plate Verifier Kit, its components, and purpose.
Guidelines for optimal camera placement, considering sunlight and distance.
Guides users through the initial setup of Free flow or Access control modes.
Details configuration steps for Access control scenarios, including I/O or Door controller integration.
Recommendations and best practices for creating and maintaining strong, secure passwords.
Instructions on selecting the appropriate geographical region for the camera's operation.
Configuration options for image resolution, rotation, and capture types.
Configuring how events, including captured images and license plates, are stored.
Guide to importing license plate numbers and associated data from a CSV file.
How to set specific active times and days of the week for license plate lists.
Adjusting sensitivity levels to improve license plate detection accuracy in low-light environments.
Setting up virtual ports to trigger actions, such as displaying text overlays via the camera's I/O port.
Configuring the system to open a barrier for authorized vehicles using a relay module.
Setting up the camera's I/O port to open a barrier for known vehicles.
Configuring notifications when an unauthorized vehicle is detected based on the blocklist.
Integrating the camera with an Axis network door controller for managing vehicle access.
Setting up the AXIS License Plate Verifier application to integrate with a door controller.
Integrating third-party software by pushing event data via TCP or HTTP POST.
Configuring the system to push captured license plate images to a server using FTP.
Setting up direct integration with Genetec Security Center, including plugin configuration.
Controls and settings for viewing live video streams, taking snapshots, and managing recordings.
Settings for image appearance, including scene profiles, saturation, contrast, brightness, and sharpness.
Creating and managing rules for triggering actions based on specific conditions detected by the device.
Performing device maintenance tasks like restarting, restoring factory defaults, and upgrading firmware.
Visual overview of the product with numbered components and their descriptions.
Explanation of the status LED indicators and their meanings during operation and troubleshooting.
Details of network, audio, and I/O connectors, including pin assignments and capabilities.
Troubleshooting firmware upgrade failures and issues that may occur after an upgrade.
Resolving issues related to setting the IP address, particularly when the device is on a different subnet.
Procedure for resetting the device to factory default settings, including license key reinstallation.
Instructions for upgrading the device firmware, including standard, factory default, and autorollback options.
To Next Page
