Axminster WORKSHOP AW150BDS - EU Declaration of Conformity

INDEX OF CONTENTS
2
EU DECLARATION OF CONFORMITY
Fully read manual
and safety instructions
before use
Eye protection
should be worn
Ear protection
should be worn
HAZARD
Motor gets hot
Dust mask
should be worn
The symbols below advise the correct safety procedures when using this machine.
Cert No: MM491E
Axminster Tool Centre Ltd
Axminster Devon
EX13 5PH UK
axminstertools.com
Type Belt & Disc Sander
Model AW150DBS
and conforms to the machinery example for which the
EC Type-Examination Certificate No AM50401624, AE50495456
has been issued by Wendeng Allwin Motors Manufacturing Co., Ltd.
at: No. 15 Sichan Road Wendeng, Shandong 264400 China (Mainland)
and complies with the relevant essential health and safety requirements.
2006/42/EC
2014/30/EU
EN ISO 12100:2010
EN 62841-1:2015
AfPS GS 2014: 01
declares that the machinery described:-
This machine complies with the following directives:
EU Declaration of Conformity
EN 55014-1: 2017+A11
EN 55014-2: 2015
IEC 61000-3-2: 2019
EN 61000-3-3: 2013+A1
Signed
Andrew Parkhouse
Operations Director
Date: 28/04/2018
EU Declaration of Conformity 02
What’s Included 03
Introduction 04
Packaging 04
General Instructions for 230V Machine 04
Specific Safety Precautions for Sanding Machines 05
Specification 05
Assembly 06-07
Set up & Adjustment 07-08-09
Illustration and Parts Description 10-11-12
Operating Instructions 13
Changing the Abrasive Belt/Disc 13-14-15-16
Maintenance 17-18
Trouble Shooting 19
Exploded Diagrams/Lists 20-21-22
Wiring Diagram 23