1111
How to Use Your Remote Control
The Remote Control allows you to monitor your stimulation
level and the need to recharge the PS. This section describes
how to use your Remote Control to:
■
Monitor Stimulator battery status and stimulation level
■
Turn up or turn down your stimulation level
■
Turn your stimulation on and off
■
Monitor charging of your Stimulator (PS only)
■
Change your stimulation program (TS only)
■
Receive notice of errors in your Remote Control or
Stimulator
Note: Do not make stimulation changes regularly. Your doctor should
change your stimulation settings if needed. Axonics recommends you
only change your stimulation if you experience discomfort
To Next Page
Loading...