1515
Use Scenarios
The following pages show how to use
your Remote Control to:
1) Connect to your Stimulator.
2) View Stimulator status.
3) Turn down your stimulation level.
4) Turn up your stimulation level.
5) Turn your stimulation off.
6) Turn your stimulation on.
7) Monitor battery charge status (PS only).
8) Change your stimulation program (TS only).
9) See a system error.
10) Turn off your Remote Control.
Note: If you have
issues using your
Remote Control,
please refer to the
Troubleshooting
section of this manual.
For more help please
contact your doctor.
To Next Page
Loading...