25
4) Turn Up Your Stimulation Level
The Remote Control must be connected to the Stimulator (see
Connect to Your Stimulator).
1
Press the “Up” button one time.
2
A. Permanent Stimulator: Watch for the stimulation level
lights to increase by one. The Remote Control will vibrate.
This may take 3 seconds.
B. Trial Stimulator: The Remote Control will vibrate
and the stimulation level lights will flash. After multiple
adjustments the stimulation level lights may change. This
may take 3 seconds.
Note: Stimulation level can only be turned up by one level at a time. It
may take up to 30 seconds for the stimulation level to fully increase,
depending on your stimulation settings. Make sure the stimulation
level is comfortable before turning up again.
To Next Page
Loading...