Need help?Do you have a question about the Axor Minispeed MS 60 and is the answer not in the manual?
Details power supply voltage, rated and peak currents, and electrical specifications for all models.
Explains the function of various trimmers for velocity, offset, and dynamic response tuning.
Details how to personalize the amplifier using personality headers and solder bridges for custom settings.
Explains how to adjust the amplifier using RDT resistance for tachogenerator feedback calibration.
Guides on using armature voltage for velocity feedback and calculating RA resistance for adaptation.
Details how to calibrate offset speed using the 'bil' potentiometer for armature feedback.
Describes calibration for high load inertia using KV and DER potentiometers.
Illustrates adjusting proportional integral gain (KV) and derivative (DER) for optimal motor response.
Explains the meaning of OK, I.n., O.C., S.T., and M.D. LEDs for amplifier status and fault identification.
Describes reversible and irreversible protection circuits like over/under voltage, over current, and temperature faults.
Provides a troubleshooting guide for common faults based on LED status, symptoms, and corrective actions.
General| Technology | Solid State |
|---|---|
| Power | 60W |
| Effects | Reverb |
| Type | Guitar Amplifier |
| Channels | 2 |
| Controls | Gain, Volume, Treble, Middle, Bass, Reverb |
| Inputs | 1/4" Instrument Input |
| Outputs | Line Out |
To Next Page
