aXtion pro M - Water Testing and Final Installation; Performing the Water Resistance Test; Post-Test Checks and Device Installation; Mounting and Accessory Options

7
2 lb.
12 in
30cm
12 in
30 cm
10 min
Test under 12" of water for 10 minutes
8
Dry the outer case prior to opening and ensure the water
test pad is dry.
Water Test Passed
Install the iPad into the front case ensuring proper
alignment. Then repeat steps 4-6 to complete
installation.
9
Repeat Steps 4-6
VESA Installation
Accessory
Shoulder Strap
MagConnect
Mounts
Hand Strap
Installation Guide ご 利 用 ガイド
pro M