Need help?Do you have a question about the AXTON AXB20STP and is the answer not in the manual?
Advice on minimizing interference by careful wire routing and cable separation.
Critical for amplifier operation. Connect GND terminal to vehicle metal, ensuring clean surface.
Connect REM terminal to car stereo's 'Amp remote' for auto turn-on.
Features high-level and low-level RCA inputs. Use either one, not both.
Indicates overload or thermal protection status with LEDs.
Setting the LPF cutoff frequency affects bass response and low-end extension.
Match input level to car stereo output for balanced bass response.
Boosts frequencies around 40 Hz for improved low-end extension, impacting headroom.
General| Type | Active Subwoofer |
|---|---|
| Impedance | 4 ohm |
| Enclosure Type | Bass Reflex |
| Driver Size | 8 inch |
| Size | 8 inches |
To Next Page
