Axxera AV604Bi - Installation Preparation; Pre-Installation Steps; Mounting the Unit

Steering Wheel Interface(SWI) Operation
Enter Set up> General>SWI Settings, it will show below screen
Description
1 Showing the current voltage of a
key in steering wheel
2 Showing the number of keys that
have undergone learning process,
and the keys are functional
3 Frequently used keys in steering wheel
4 Default
5 Clear a previous setting
6 Conrm setting
7 Setting for various types of steering wheels (depending on the types
of vehicles)
Steering Wheel learning Process
1 Short press on any key in steering wheel, take “ “ key as an example,
the screen of SWI Settings will show its voltage value.
2 Press “ “ on the screen of SWI setting, and then press OK to complete
the learning process of this key.
3 Repeat the above processes to learn for more keys. Map No. is showing
the total number of keys that are functional.
SWI
SWI GND
SWI 1
SWI 2
SWI GND
SWI 1
SWI 2
1
3
2
4 5 6 7
SWI Connecting Wires