How to fix Axxera Car Receiver that won't turn on?
If your Axxera Car Receiver isn't turning on, here's what you can check: * **Yellow or Red Wire:** Ensure these wires are correctly connected and have the proper voltage (11-16VDC). * **Black Wire:** Verify the black wire is properly connected to ground. * **Fuse:** See if the fuse is blown and replace it if necessary.
What does 'NO SUPPORT' mean on the display of my Axxera Car Receiver?
If 'NO SUPPORT' is displayed on your Axxera Car Receiver, it means that an invalid ID3 tag version is present. The receiver supports version 1.0 to 2.4 ID3 tags.
Why does my Axxera AXD430 Car Receiver keep blowing fuses?
Your Axxera Car Receiver might be blowing fuses due to a few reasons: * Check if the yellow or red wire is touching the chassis ground, which could indicate a pinched wire. * Inspect the speaker wires to ensure they are not touching the chassis ground, as this could also mean a pinched wire. * Make sure you're using the correct fuse rating for your unit.
What to do if my Axxera AXD430 Car Receiver has power but no sound?
If your Axxera Car Receiver powers on but produces no sound, consider the following: * **Speaker Wires:** Check the connections at the speakers to ensure they are properly connected. * **Wire Insulation:** Inspect the speaker wires to confirm that none are touching each other or the chassis ground. Insulate any bare wires to prevent contact.
How to stop my Axxera AXD430 Car Receiver from skipping?
If your Axxera Car Receiver is skipping excessively, here are a couple of things to investigate: * Confirm that the unit is mounted correctly and the backstrap is secure. Check the mounting sleeve and backstrap support. * Examine the media (CD, CD-R, or CD-RW) for any physical defects like scratches.
What does 'NO FILE' mean on my Axxera AXD430 Car Receiver display?
If 'NO FILE' appears on your Axxera Car Receiver's display, it could indicate a few issues: * There might be a disc read error. Try pressing the eject button or RESET. * It could be a focus error, or the disc might be upside down. Press eject or RESET. * If using WMA files, they might be protected by DRM (Digital Rights Management). Use unprotected WMA files. * There might be no playable MP3/WMA files on the device. Check the device for valid files. * It could be a communication error. Remove and reconnect the device.
Why won't my Axxera AXD430 accept a disc?
If your Axxera Car Receiver won't accept a disc, here are a couple of potential reasons: * The CD mechanism position might be out of alignment. Try pressing the EJECT button to reset it. * The CD transit screws might still be in place. Remove the 2 transit screws located on top of the unit.
General| Bluetooth | Yes |
|---|---|
| Radio Tuner | AM/FM |
| Touchscreen | Yes |
| SD Card Input | Yes |
| DVD Player | Yes |
| Backup Camera Input | Yes |
| Resolution | 800 x 480 |
| Touchscreen Type | Resistive |
| Expandable Storage | SD Card |
| Wi-Fi | No |
| GPS | No |
| USB Ports | 1 |
| Preamp Outputs | 3 Pairs |
| Screen Size | 6.2 inches |
| Display Size | 6.2 inch |
| Steering Wheel Control Compatibility | Yes |
To Next Page
