Installation instructions for part AXGM-04
REV. 1/20/2020 NSTAXGM-04
axxessinterfaces.com
•
metraonline.com
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Axxess Integrate
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Provides NAV outputs (parking brake,
reverse, speed sense)
• Retains chimes
• Pre-wired AXSWC harness (AXSWC sold
separately)
• Retains OnStar / OE Bluetooth
• Adjustable OnStar level
• Designed for amplified models
• Retains balance and fade
• AXUSB-CBL updatable (sold separately)
• AXGM-04 interface • AXGM-04 harness
• 16-pin harness with stripped leads
INTERFACE FEATURES
INTERFACE COMPONENTS
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell caps, etc.)
• Small flat-blade screwdriver
TOOLS REQUIRED
AXGM-04
GM Data Interface
2000-2013
APPLICATIONS
See inside front cover
Connections to be made ..................................... 3-4
Installing the AXGM-04 ..........................................5
Initializing the AXGM-04 ........................................5
Adjusting the AXGM-04 ..........................................5
Table of Contents
To Next Page
Need help?
General
