Axxess XSVI-2004 User Manual

XSVI-2004
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 9/24/19 INSTXSVI-2004
Product Info
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties • Small flat-blade screwdriver
TABLE OF CONTENTS
Connections ............................................................2
Installation .............................................................2
Programming .........................................................3
Adjustments ...........................................................3
Chevrolet Corvette Data Interface
1997-2004
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• High level speaker input
• Retains amplified door woofers
• Micro-B USB updatable
• XSVI-2004 interface • XSVI-2004 harness package* • Differential converter
* Consists of (2) harnesses

Axxess XSVI-2004 Specifications

General

Brand	Axxess
Model	XSVI-2004
Category	Recording Equipment
Language	English

Summary

Interface Features

Provides Accessory Power

Supplies 12-volt, 10-amp accessory power for the vehicle's electrical system.

Retains RAP (Retained Accessory Power)

Maintains accessory power functionality after the ignition is turned off.

High Level Speaker Input

Accepts high-level audio signals directly from factory speaker outputs.

Retains Amplified Door Woofers

Preserves the function of factory-installed amplified door woofers.

Micro-B USB Updatable

Allows for firmware updates via a Micro-B USB connection.

Tools and Installation Accessories

Required Tools

Lists essential tools like crimping tool, solder gun, wire cutters, and screwdrivers.

Required Accessories

Specifies necessary accessories such as connectors, solder, heat shrink, and zip ties.

Connections

Wiring to Aftermarket Radio

Details specific wire connections from the XSVI-2004 harness to the aftermarket radio.

Installation Steps

Differential Converter Wiring

Instructions for connecting the XSVI-2004 harnesses to the differential converter.

XSVI-2004 Interface Wiring

Guide for connecting the XSVI-2004 interface to the vehicle's wiring harness.

Programming

Power Loss Recovery Procedure

Steps to re-establish interface function if power is lost.

Initial Setup and Testing

Procedure for cycling the key and testing functionality after installation.

Adjustments

Audio Level Adjustment

Instructions for setting the audio level using potentiometers.