Need help?Do you have a question about the AYR 763 and is the answer not in the manual?
General| Brand | AYR |
|---|---|
| Model | 763 |
| Category | Intercom System |
| Language | English |
Choose a suitable bolt based on door thickness and screw it into the hole.
Insert the barrel and FPC cable through the peephole, then affix the outdoor part.
Mount the bracket using the FPC cable and screws, then lock it to the outdoor unit.
Connect the FPC cable from the outdoor part to the indoor unit connector.
Align the indoor unit slots with the bracket projections and buckle up to lock.
Ensure your router operates on a 2.4GHz band for compatibility.
Follow the sequential steps for device pairing and network setup.
Exit and restart the app/product if network configuration fails.
Navigate to 'Camera & Lock', then select 'Smart doorbell' in the app.
Start the device and long press the right key to enter network configuration mode.
Verify the indicator flashes correctly and click 'Next' in the app.
Input Wi-Fi credentials, display QR code, and point the device camera at it.
The device confirms successful network setup after pairing.
Click the 'pencil' symbol in the video window to access device settings.
To Next Page
