MODES OF OPERATION
COOLING MODE
The cooling function allows the air condit-
ioner to cool the room and at the same time
reduces the humidity in the air.
COOL
To activate the cooling function ( COOL ) , press the
MODE button until the symbol ( COOL )
appears on the display.
The cooling cycle is activated by setting the keys
or at a temperature lower than that of the room.
To optimize the functioning of the conditioner, adjust
the temperature (1) , the speed (2) and the direction
of the air flow (3) by pressing the keys indicated
HEAT
The heating function allows the air conditi-
oner to produce hot air.
To activate the heating function ( HEAT ) , press the
MODE button until the symbol ( HEAT )
appears on the display.
With the keys or set a temperature higher than
that of the room..
To optimize the functioning of the conditioner adjust
the temperature ( 1 ), the speed ( 2 ) and the direction
of the air flow ( 3 ) by pressing the keys indicated
In HEATING operation, the appliance can automa-
tically activate a defrost cycle, which is essential
to free the condenser from an excessive deposit of
frost .This procedure usually lasts for 2-10 minutes
during defrosting,fans stop operation. After defros-
ting ,it returns to HEATING mode automatically.
The appliance is fitted with a Hot Start function,
which delays appliance to startup in a few seconds
to ensure an immediate output of hot air.
10
HEATING MODE
OFF
ON
C
AUTOQUIET
POWERFUL
hr
DELAY
TIMER
HEALTHY
AIR
SWING
FAN
SPEED
ON/OFF
MODE TIMER
FAN SPEED SUPER ECO
SWING SLEEP HEALTHY
DRY
FAN
HEAT
COOL
FEEL
ANTI-MILDEW
C
h
ON
COOL
1
2
3
OFF
C
AUTOQUIET
POWERFUL
TIMER
HEALTHY
DRY
FAN
HEAT
COOL
FEEL
ON
HEAT
ON
hr
DELAY
AIR
SWING
FAN
SPEED
C
h
1
ON/OFF
MODE TIMER
FAN SPEED SUPER ECO
SWING SLEEP HEALTHY
ANTI-MILDEW
1
2
3
1
TIMER
HEALTHY
TIMER
HEALTHY
To Next Page
Loading...
Need help?
General
