Introduction
The CNC Shield V3.0 Bundle consists of CNC Shield for Atmega328p and 4
A4988 stepper motor driver modules. The CNC Shield V3.0 can be used as
drive expansion board for stepper motor drivers.
There are 4 slots on the board for stepper motor driver modules, and each
stepper motor needs only two I/O ports. Shield supports A4988 and
DRV8825 driver types.
The CNC Shield V3.0 Bundle suitable for a variety of small and medium
sized automation equipment and instruments, such as engraving machine,
marking machine, cutting machine, laser typesetting, plotters, drawbots,
CNC machine tools, handling the devices.
- 3 -
To Next Page