Azbil TY6300Z1000 User Manual

1
Specifications/Instructions
AB-6601
Room Thermostat

General
Room Thermostat, Model TY6300Z1000, is a two-
position (ON or OFF) thermostat for indoor use.
It automatically turns on/off warm air heating
equipment, a hot water boiler, or a fan for a plastic
greenhouse, glass house, a crops storage, a
livestock crib, or the like for farm or horticultural
applications.
Also it can be used as anti-freeze thermostat for
ON/OFF operation of a circulating pump or a heater,
or as a high/low limit switch.

Features
(1) Electric two-position control
The temperature sensor, liquid filled, detects
changing of room temperature and activates the
microswitch.
(2) Easy temperature setting
You can set the temperature by the knob in the
front of the thermostat.

Model Number
Model number
TY6300Z1000 Room Thermostat

Azbil TY6300Z1000 Specifications

General

Ambient Operating Humidity	35 to 85% RH (non-condensing)
Protection Rating	IP66 (front panel)
Application	Temperature control for various applications
Control Method	PID control
Output	Relay output
Power Supply	100 to 240 VAC, 50/60 Hz
Input	Thermocouple, RTD
Display	LED display

Summary

General

Features

Electric two-position control

Liquid-filled sensor detects room temperature changes to activate the microswitch.

Easy temperature setting

Set the desired temperature by turning the knob on the front of the thermostat.

Safety Instructions

Usage Restrictions

Product is for general air conditioning; avoid use in situations affecting human life.

Cautions for connecting to system

Product breakdown may not notify other equipment; liquid leaks can cause contact welding.

Prohibitions for installing this product

Do not install in environments with chemicals, moisture, direct sun, wind, rain, or vibrations.

Cautions for installing this product

Install for accurate measurement, avoid direct drafts, ensure secure mounting, and prevent unauthorized access.

Dimensions

Specifications

Installation

Installation Location

Install on a wall where air circulates for representative temperature measurement.

Installation procedure

Attaching the grommet

Procedure for replacing the existing product

Wiring

Instrumentation Examples

Settings

Temperature setting

Adjust the setting knob to set the desired temperature (setpoint).

Switching operation

Operation check

Maintenance