1ª 10155 ES 9 - 2009
53
4. WOKING CONDITIONS AND NORMS
Working conditions
Ô The adequate working temperature is 0°C to 60°C and between 35% and 95%
relative humidity.
Ô The voltage of the installation electrical must correspond with the voltage indicated
on the plaque of characteristics (on the back of the machine) and not exceed +10
%, -6%.
Ô It will work correctly with at an maximum angle of 2°, front and side. Once placed,
the machine should be levelled with the adjustable feet, situated at the front of the
machine, with an Allen key number 4.
Ô The noise level of the machine of is series does not go over 70 dB.
Norms
Ô The machines in the STEP series have been designed under European norms as
accredited by the CE mark in the characteristics plaque. The manufacturer
guarantees that these machines meet the following directives:
• Directive CE of machines DSM 89/392/CEE and its modifications.
• Directive CE of low voltage DBT 73/23/CEE and its modifications.
• Directive CE of electromagnetic compatibility EMC 89/336/CEE and its
modifications.
• European directives RoHS.
To Next Page
Loading...
