Follow the instructions in this manual on how to use this product.
Eye and face protection specifically designed for paintball use,
Never shoot any marker at velocities exceeding 300 FPS (Feet
Per Second), or velocities greater than local fields or
Do not shoot at people, animals, houses, cars, or anything not
Fire only 0.68 caliber paintballs or reballs with this marker.
the marker is not in use.
Any modifications or tampering of original factory parts will
at all times, including resale.
void all warranties and liabilities from Azodin Paintball.
Tank valves must be installed or removed by a qualified personnel.
All tanks must be retested before their expiration date.
Improper use, filling, storage of the air tank may cause death,
Air tanks are used for the sport of paintball.
120
(BTA1).
CO2 or HPA/ N2 Air tanks have enough force to fly off and cause
serious injury or death if the valve unscrews from the tank head.
Make sure that the valve is turning with the tank.
if the valve starts to unscrew from the tank.
1. First, place the BARREL BLOCKING DEVICE over the barrel.
2. Always point your marker in a “SAFE” direction when not in play.
The Safety is ON when it protrudes out on the right hand side
of the grip frame.
Point the marker in the safe direction before unlocking it.
To disengage the Safety, push the Safety Button so it protrudes
out on the left side of the grip frame.
3. Firmly screw in the CO2/ HPA/ N2 air tank to the bottom ASA
(BTA1).
Tighten the air tank clockwise all the way into the marker’s
bottom ASA until it stops.
CAUTION: Never use any hand tools to screw air tank into
the bottom ASA.
4. Attach a paintball hopper/ loader into the marker’s feedneck.
5. Remove the barrel blocking device and disengage the safe mode.
CAUTION: Now the marker is LIVE, pulling the trigger will
fire a paintball.
Only test your marker at the safe direction or on the
paintball field.
6. Check marker’s velocity FPS (Feet Per Second). Turning the
velocity adjuster (VA01) clockwise will increase the velocity.
Counterclockwise will decrease the velocity.
7. Unscrew the CO2/ HPA/ N2 air tanks from the marker’s
bottom ASA.
8. After playing, empty out all the paintballs from the hopper.
Then detach the hopper from the marker.
CAUTION: There may be 1-2 paintballs in the breach area;
To remove the paintballs you can turn the marker upside
down or fire it into a safe area.
9. Place the barrel blocking device over the barrel and reengage
the safe mode by pushing the safety button to the right side.
10. Store the marker in a paintball gear bag or in a dry safe place.
To Next Page
Need help?
General