Closing your umbrella
- Insert the crank handle and slowly turn the handle
until the umbrella is in the closed position.
- Pull out the fabric (unfurl) from between the closed
arms and wrap fabric around the umbrella.
- Secure the fabric with your wrap strap.
- If applicable place the cover bag over the umbrella.
If you intend to keep your umbrella closed for a
period of time you should ensure the fabric is dry
and the power supply is isolated.
General Information
Other points to note...
We recommend that your umbrella is operated by an adult.
If you have any opening or closing issues contact your
supplier as soon as possible.
Always ensure you have permission to install an umbrella.
Do not position your umbrella near a naked flame.
Umbrellas not installed on in-ground sleeves are not
covered under our recommended wind speeds.
Coastal locations should make use of cover bags when the
umbrella is in the closed position.
You should regularly check your umbrella over to ensure
that is stays in peak perforance.