Your umbrella
LED Lighting
The lighting consists of 4 LED strips encased in solid
casing, attached to the underside of the corner arms.
As standard the LEDs are available in cool white, but
we can supply warm white if required.
Heating
The heating kit consists of 4 x 1kw or 1.5kw heaters
attached to the underside of the lower fixing ring, via fold
down arms which can be folded down to rest on the moast
of your umbrella. Each heater has a weatherproof connector
that attaches to the electrical distribution hub.
Distribution hub
This is where all of the control gear for your umbrella is
located as well as your push for heat timer button which
regulates the length of time the heaters come on for. The
hub must not be exposed to excessive water.
Arm Brackets
Acrylic Membrane
To Next Page
Loading...