1. Always start with checking the wireless credentials, SSID and wireless security, if the
wireless clients cannot connect to the AP
2. Think of the possibility of wireless channel congestion
¤ Please ensure wireless channel setting is set as “Auto” at all times. Should
channel congestion is suspected, it is recommended to reboot the RG.
¤ If the wireless channel is so congested, the wireless client may get an IP address
but might not be able to, from time to time, surf the internet or use the wireless
network resource
3. Place the RG on a flat surface away from:
¤ Blockage such as artificial barriers
¤ Electronic devices such at bluetooth devices, microwave ovens and cordless
telephones
¤ Water containing equipment filled with water
Aztech FG7003GRV(AC) Residential Gateway
42
To Next Page
Loading...
