Aztech Technologies (170805)
HOW CAN I TELL IF MY WIRELESS CLIENT (i.e. the mobile / wireless device) SUPPORTS
5GHZ BAND?
By doing wireless SSID scanning, if the client supports 5GHz band, you will be able
to see the default 5GHz SSID, with prefix of SingTel7003(5G)-xxxx as illustrated below.
Please note that if the wireless client/adapter is able to see the 5GHz SSID, it does not
necessarily mean that it is a Wireless AC client. There is a need to check against the hardware
specifications if it really is a wireless AC client.
Frequently Asked Questions
Aztech FG7003GRV(AC) Residential Gateway
46
To Next Page
Loading...
