1. Always start with checking the wireless credentials, SSID and wireless security, if the
wireless clients cannot connect to the AP
2. Place the RG vertically, on a flat surface, properly ventilated place, and away from:
¤ Blockage such as artificial barriers
¤ Electronic devices such at blue-tooth devices, microwave ovens and cordless
telephones
¤ Water containing equipment filled with water
3. Think of the possibility of wireless channel congestion
¤ Please ensure wireless channel setting is set as “Auto” at all times. Should
channel congestion is suspected, it is recommended to reboot the RG.
¤ If the wireless channel is so congested, the wireless client may get an IP address
but might not be able to, from time to time, surf the internet or use the wireless
network resource
49
Aztech FG7009GR(AC) Residential Gateway
To Next Page
Loading...
