Aztech Technologies (170805)
HOW CAN I TELL IF MY WIRELESS CLIENT (i.e. the mobile / wireless device) SUPPORTS
5GHZ BAND?
By doing wireless SSID scanning, if the client supports 5GHz band, you will be able
to see the default 5GHz SSID, with prefix of SINGTEL(5G)-xxxx.
Please note that if the wireless client/adapter is able to see the 5GHz SSID, it does not
necessarily mean that it is a Wireless AC client. There is a need to check against the hardware
specifications if it really is a wireless AC client.
IS THIS FG7009GR(AC) VLAN TAG OR non VLAN TAG?
The firmware loaded on FG7009GR(AC) is VLAN tagged
Frequently Asked Questions
53
Aztech FG7009GR(AC) Residential Gateway
To Next Page
Loading...
