D
Duplex operation. Otherwise, blank for Simplex operation.
PRI
Priority channel is selected.
ACK Your DSC call has been received.
Low Battery warning (activates at 10.5 V).
FISH 275 Waypoint name and bearing.
800nm Distance to waypoint.
0.00 XTE (Cross track error).
NO GPS GPS data is not available.
X
AUTO SWITCH is disabled.
1-6 Beep tones & call alerts
• Error 2 short beeps
• Acknowledge 1 long beep
• Alarm T
w
o-tone ring
(repeated for 2 minutes or until any key is pressed)
• LL position call alert Friendly 5-tone ring sequence
(press an
y key to cancel)
• WX alert/SAME alert Ear-catching multi-tone sequence
• ROUTINE call alert Friendly 5-tone ring sequence
(pr
ess an
y key to cancel)
• URGENCY call alert Two-tone ring
(repeat
ed for 2 minutes or until any key is pressed)
• SAFETY call alert Two-tone ring
(repeat
ed for 2 minutes or until any key is pressed)
• DISTRESS call alert Two-tone ring
(repeat
ed for 2 minutes or until any key is pressed)
B&G - V50 & H50 Operation Instructions10
To Next Page
Loading...
Need help?
General
